|
|
 |
|
|
Aluminum Performance Cases |
|
|
|
A Moser 9" Ford Aluminum Center Section is one of the strongest money can buy! |
|
|
|
Moser Aluminum Cases are made of 356-T6 aluminum with 7075-T6 aluminum caps and billet steel adjusters, and they feature a super strong through-bolt design to give the case
increased strength and decreased ring gear deflection common in most aluminum case designs. Available in 3.062:", 3.250", and 3.812 bore sizes; all Moser Aluminum cases are are drilled for the 3/8" stock
pinion studs and 7/16" heavy duty studs. The aluminum cases are also designed to be used with either a standard pilot bearing with snap ring retention or a heavy duty , wider pinion bearing is also available
utilizing button head bolts for retention. Moser Performance Cases weigh only 16 lbs., 15 lbs. lighter than our Nodular Iron Cases, are CMM checked for machining accuracy, and are supplied with all Grade 8
hardware. SAME DAY SHIPPING (if ordered before 2 p.m. est) |
|
|
|
|
Part # |
Application |
Cost |
3062ALU |
3.062" Bearing Size |
$475.00 |
3250ALU |
3.250" Bearing Size |
$475.00 |
3812ALU |
3.812" Bearing Size |
$475.00 |
|
|
|
|
|
Nodular Performance Cases |
|
|
|
Moser 9" Ford Nodular Iron cases are the toughest on the planet. Moser Nodular Iron Cases are available in two bearing sizes. The 3.062" side bearing size is made for
posi-traction setups or spools with fewer than 35 splines and the 3.250" side bearing size is made for use with 35 spline and 4 spline spools. There are a number of features that make our Moser case the
right case for you. All Moser cases are heat-treated and stress relieved before all CNC machining is completed. In addition, Moser cases have forged steel caps with 5/8' bolts, machined adjusters, and are
tapped for an oil filler plug. SAME DAY SHIPPING (if ordered before 2 p.m. est) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Part # |
Application |
Cost |
3062NOD |
3.062" Bearing Size |
$320.00 |
3250NOD |
3.250" Bearing Size |
$320.00 |
3062STK |
3.062" Bearing Size |
$255.00 |
|
|
Moser Replacement Cases |
|
|
|
For low to medium horsepower applications (up to 700 hp). |
|
|
|
Same strong nodular iron.
Weighs roughly 4 lbs. less.
1/2" maincap bolts
Reinforced around the pilot bearing.
3.062 diameter carrier bearing. |
|
|
|
|
|
 |
|
|
|
|
|
|
Pinion Supports |
|
|
|
We offer a lightweight, heavy duty pinion support for all 9" Ford cases. Our pinion supports are machined from solid aluminum blanks and are set up for oversized tapered bearings for increased strength.
Moser pinion supports are available for both the standard 28 spline and larger 35 pinion sizes. |
|
|
|
|
|
Part # |
Application |
Cost |
PS028 |
9" Daytona - 28 Spline |
$110.00 |
PS035 |
9" Pro - 35 Spline |
$110.00 |
PS28C |
9" Daytona -Nodular |
$105.00 |
|
|
|
|
|
Vanderlely's Auto
4460 S. Park Road, Ottsville, PA
610-847-1090
2004 |
|
